Emotiva XPA-DR2 Two-Channel Power Amplifier
Regular priceRs. 295,000.00
Shipping calculated at checkout.
- Condition: New
- Warranty: Official Manufacturer Warranty
- Free Shipping Across Pan India
- In stock, ready to ship
- Inventory on the way
- This is a 2-channel power amplifier for audio.
- A high-current SMPS with a customised configuration is featured in the XPA-DR2.
- It provides input and output for remote triggers.
- This is capable of providing 3 kW of continuous power with the utmost dependability and efficiency.
|Sales Package||Emotiva XPA-DR2 Two-Channel Audio Amplifier and User documentation|
|Dimension||17” wide x 8” high x 19” deep (unboxed; including feet)
17” wide x 7” high x 19” deep (unboxed; without feet)
24-1/2” wide x 12” high x 24-3/4” deep (boxed)
|Weight||42.5 lbs (unboxed)
47.5 lbs (boxed)
|Audio Specifications (High-Powered Single Channel Modules)||Power Output (both channels driven):
550 watts RMS, per channel, into 8 Ohms, at <0.1% THD.
800 watts RMS, per channel, into 4 Ohms, at <0.1% THD.
Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).
Broad Band Frequency Response: 20 Hz to 50 kHz +0/-2 dB.
THD + noise: < 0.008%; at 100 watts RMS; 1 kHz; 8 Ohms.
Signal to Noise Ratio (8 Ohm load):
> 120 dB; ref FTC rated power; unbalanced input (A-weighted).
> 96 dB; ref 1 watt; unbalanced input (A-weighted).
Minimum Recommended Load Impedance (per channel): 4 Ohms.
(which equals one 4 Ohm load or two paralleled 8 Ohm loads).
Damping Factor (8 Ohm load): > 500.
Input Sensitivity (for rated power; 8 Ohm load): 2.1 V.
Gain: 29 dB.
33 kOhms (balanced).
23.5 kOhms (unbalanced).
|Power Requirements||Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).|
|Input and Output Connections||Unbalanced (RCA); balanced (XLR); one each, per channel, user selectable.
Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 120 mA.
|Rear Panel Controls||AC Power switch: rocker switch (switches AC main power)
Status LEDs switch: disables front panel Status LEDs and dims Standby button halo.
Input selector switches (one per channel):
metal toggle switches; select between balanced and unbalanced inputs.
Circuit Breaker: press button to reset circuit breaker.
|Protection||The XPA-DR2 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.|
|Warranty Type||Official Manufacturer Warrantty|
|Warranty Period||5 Year|
We usually try to dispatch the order on the same day. Usually the shipping duration will vary between 2 -7 days from the day of ordering. Please be assured that we will 100% deliver the product and our team will keep you updated on the shipping process.