Crestron AV3 3-Series Control System
Crestron AV3 3-Series Control System
Product Description
- It is equipped with a 3-Series® Control Engine, which is significantly quicker and more potent than previous control systems.
- It supports control apps for Android TM, iPhone®, and iPad®.
- It supports SNMP remote management.
- It has a host USB 2.0 speed port.
- Support web-based and computer-based Smart GraphicsTM control for XPanel.
Specification
| Sales Package | Crestron AV3 3-Series Control System and User documentation |
|---|---|
| Brand | crestron |
| Model | AV3 |
| Year | |
| Color | black |
| Height | 3.47 in (89 mm) without feet |
| Width | 17.28 in (439 mm); 19.00 in (483 mm) with rack ears |
| Depth | 10.06 in (256 mm) |
| Weight | 4.0 lb (1.9 kg) |
| Control Engine | Crestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs |
| SDRAM | 1 GB |
| Flash | 4 GB |
| Memory Card | Supports SD and SDHC cards up to 32 GB |
| External Storage | Supports USB mass storage devices up to 1 TBSupports USB mass storage devices up to 1 TB |
| Ethernet | 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client |
| Control Subnet | 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode |
| Cresnet | Cresnet master mode |
| USB | Supports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port |
| RS-232/422/485 | For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485 |
| IR/Serial | Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud |
| Temperature | 41° to 113° F (5° to 45° C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 45 BTU/hr with no Cresnet devices, no control cards; 71 BTU/hr with full Cresnet load, no control cards; See individual control card spec sheets for additional specifications |
| Chassis | Metal, black finish, vented top and sides |
| Faceplate | Extruded metal, black finish, polycarbonate label overlay |
| Mounting | Freestanding or 2 RU 19-inch rack-mountable (adhesive feet and rack ears included) |
| Main Power | 2.4 Amps @ 100-240 Volts AC, 50/60 Hz |
| Available Cresnet Power | 75 Watts (3.125 Amps @ 24 Volts DC) |
| S1 – S3 | (3) 3-Series control card expansion slots (optional)[3] |
| COM 1 – 2 | (2) 5-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232/422/485 ports [4]; Up to 115.2k baud; hardware and software handshaking support |
| COM 3 – 6 | (4) 3-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 ports [4]; Up to 115.2k baud; software handshaking support |
| IR - SERIAL OUTPUT 1 – 8 | (2) 8-pin 3.5 mm detachable terminal block; Comprises (8) IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud |
| RELAY OUTPUT 1 – 8 | (2) 8-pin 3.5 mm detachable terminal blocks; Comprises (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
| LAN | (1) 8-pin RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port [4]; Connects to the customer's LAN |
| CONTROL SUBNET | (1) 8-pin RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port [4]; Provides a dedicated local network for Crestron devices |
| USB | (1) USB Type A female; USB 2.0 port for storage devices |
| MEMORY | (1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for memory expansion |
| I/O 1 – 8 | (1) 9-pin 3.5 mm detachable terminal block; Comprises (8) "Versiport" digital input/output or analog input ports (referenced to GND) [4]; Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1; Digital Output: 250 mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled; Programmable 5 Volts, 2k Ohms pull-up resistor per pin |
| NET | (1) 4-pin 3.5 mm detachable terminal block; Cresnet master port, outputs power to Cresnet devices [4]; See "Power" section for additional specifications |
| 100-240V~2.4A 50/60Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included |
| G | (1) 6-32 screw; Chassis ground lug |
| COMPUTER (front) | (1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only |
| PWR | (1) Green LED, indicates operating power supplied from AC line |
| NET | (1) Amber LED, indicates communication with the Cresnet system |
| MSG | (1) Red LED, indicates control system has generated an error message |
| HW-R | (1) Recessed pushbutton for hardware reset |
| SW-R | (1) Recessed pushbutton for software reset |
| CNPS FAULT | (1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication |
| SLOT 1 – 3 | (3) Green LEDs, indicate control cards are inserted in the corresponding slots [3] |
| LAN (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity |
| CONTROL SUBNET (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity |
| Warranty Type | Official manufacturer warranty |
We usually try to dispatch the order on the same day. Usually the shipping duration will vary between 2 -7 days from the day of ordering. Please be assured that we will 100% deliver the product and our team will keep you updated on the shipping process.
Frequently Asked Questions
I haven’t heard of AVFive.com?
We understand your concern! Maybe we are not Flipkart or Amazon yet but we are able to provide customize solutions specifically to your needs. Unlike our competitor, we provide genuine seal packed products with warranty. Unlike other companies that offer Take It or Leave It packages, we are more flexible and able to dial in specifically to your needs. Yes our competitors offer similar products, however they aren't able to match the level of customer service we provide. We are more available and provide better customer service
How can I verify the authenticity of the products?
First of all, at Avfive we are only selling genuine seal packed products. While most of our other competitors are focussing on providing refurbished products at cheap rates, we are only focussing on providing authentic products with minimal profit margins.
You can always check the authenticity of the products through-
1- Genuine product will always have a warranty card inside the box. Serial number & name label of speakers is always mentioned on it. We recommend you would check warranty card & name label of product before the shop persons installs it
2- If any website offers you a price which is much lower than the MRP or price offered by other websites, kindly be alert and check speakers carefully.
3- Else you can directly visit the brand service centre and ask them to verify the product.
How can I claim the warranty of the product?
Every product on our website comes with a warranty. You just need to contact the brand customer care to claim the warranty. You will just need to fill the Warranty Claim Request Form by sharing with all the necessary details - defect, invoice, model name, etc and share the GST invoice we provide you.
What if I get a wrong/damaged/defective product?
While such cases are extremely rare, however if you ever face such issues, you can directly call us at our support number and our support team will either replace the product immediately or will initiate a full refund, No questions asked.
When can i expect my order to arrive?
We usually try to dispatch the order on the same day. Usually the shipping duration will vary between 2 -7 days from the day of ordering. Please be assured that we will 100% deliver the product and our team will keep you updated on the shipping process.