Soundbar Mounting Ideas for Your Room

Soundbars are an ideal accessory for today’s flat-screen TVs.

However, if you want the best sound possible, you must place your soundbar in the optimal location with respect to your flat-screen TV and the room.

Discovering the optimal viewing and listening position for your height can greatly improve your experience.

You may set up your soundbar in one of three basic ways.

One may put it in a cabinet, on the wall, or on the TV stand.

The soundbar’s intended function (to mimic surround sound) does, however, provide some unusual challenges when attempting to instal it inside a cabinet.

If the hollow were any smaller, the sound would be muted.

Some tips on setting up a soundbar in your home theatre system are provided below.

Before we begin, you can also follow our guide on how to connect soundbar to TV to know more

Attached To The Wall

Installing the soundbar and TV at the same time is required. Taking down the TV from the wall is the first step in installing the kit’s panel if it is already mounted. You should check that the wall can support the weight of the gadgets you want to place before you even consider mounting them. Based on the kind of drywall, choose the appropriate anchors (such as dubels, screws, and screws).

A wall-mounting bracket allows you to securely attach the soundbar to the wall. Usually the mount for the soundbar is part of the package.

The minimum installation distance between the soundbar and the TV is 10 centimetres.

Use screws to secure the bracket to the wall after positioning it flush against the wall. When mounting a panel beneath the TV chassis, the up arrow should point directly in the middle of the screen.

It would be ideal if the screw holders could be inserted into the corresponding screw holes on each side of the main soundbar unit. Use the screw holes to secure them.

Connect the panel to the brackets as required. Verify that the mounting studs are positioned near the base of the connections for maximum stability.

The soundbar should then be connected immediately. Because it will be more challenging to access the connections after the panel has been installed, the wires are connected at the time of installation.

To make a connection, you must follow the guidelines. The soundbar’s HDMI port, together with its optical and coaxial inputs, will be the most user-friendly options for establishing a connection ( more often this is done if your device model is not equipped with HDMI ).

Seeing the video instructions for connecting the sound panel after installation helps ensure that you don’t make any mistakes or get the wires and connections mixed up.

Attached To the TV

A number of TV wall mounts have special soundbar brackets.

Mounting your soundbar directly to the TV eliminates the need to drill and align holes in the wall.

There are several various TV mounts that you can use to connect your TV to a wall; a common choice is the MD5420 Universal Detachable Mount for its simplicity of installation.

In addition to your regular TV wall mount, this one attaches to the VESA mounting holes on the back of your TV.

When you mount the soundbar on the TV, there are several benefits. First, the sound moves with the TV. Whether you tilt the TV or shift it the other way, you can be confident that the sound will be directed towards the person or persons viewing the TV.

Because it does not sit anywhere or screw to the wall, where sound vibration may be absorbed by the surface, the quality of sound is improved whether the panel is mounted horizontally or vertically. This improves the quality of the sound in your home theatre and makes it possible for the sound to travel further away from the speakers.

On a Cabinet Or a Table

A soundbar may be set up underneath a flat-screen TV in a stand, table, shelf, or cabinet. This works well, since the audio will originate from your current viewing position. So that it does not obscure the screen, you should compare the height of the sound panel to the distance between the base of the stand and the bottom of the television.

This is how you can set up a soundbar on cabinet or a table:

The soundbar should be placed as far forward on the shelf within the cabinet as feasible for optimal side-firing sound. The soundbar should project the sound vertically for the surrounding sound effects if it supports Dolby Atmos, DTS: X, or DTS Virtual: X, therefore putting a shelf within the cabinet is not ideal.

Where To Avoid Mounting A Soundbar

Soundbars were designed to enhance your listening experience, but they won’t function to their fullest if you position them too high or too low.

A swivelling design is available on certain soundbar mounts, allowing you to direct the speaker to the sweet spot in the room.

Placing the soundbar where it would block part or all of the screen is likewise not recommended.

In such a case, you may either install the speakers above the TV and tilt them down toward your head or raise the TV up out of eye level.

Check that the soundbar’s speakers may be turned toward your seating area.

There will be no rerouting or distortion of the sound as it travels to your ears.

Placement of the soundbar in a cutaway may degrade sound quality due to obstruction from above or to the sides.

It’s conceivable that the sound bar won’t be audible due to a notch in the wall.

With just front-firing speakers, this can be accomplished, but the shelf above will muffle any resulting Dolby Atmos or surround effects.

Place the soundbar on a high shelf behind the TV or mount it on the wall above the display for the best possible sound.

If moving the speaker to a more visually appealing spot would lower the quality of the sound, then it wouldn’t be worth it.

Should You Get an Expert to Put Up Your Soundbar Wall Mount?

You can mount the soundbar yourself if you’re handy with tools like drills, levels, and screwdrivers. If you’re not sure of your DIY skills, though, hiring a specialist will save you time and hassle.

Is It Possible To Put Soundbar On Vertically?

Although it isn’t recommended, you may put your soundbar on a vertical stand. Mounting a soundbar vertically will negatively impact the sound quality and prevent you from taking use of the 3D sound effects that are meant for horizontal mounting.

Conclusion

A soundbar may not be able to replace a full home theatre system with a receiver and many speakers, but for many people it provides more than enough sound for watching TV or listening to music. Soundbars are a convenient way for those with a large home theatre setup to view a second TV in the room.

Don’t only focus on the cost of the sound bar; instead, think about the customization options, functionality, and return on investment it can provide and you’re good to go! Place your soundbar wherever you like and get the best listening experience.