Best In-Wall Speakers In 2023: Reviews & Buying Guide

You need to strategically place the speakers around the room to achieve a cinema-like surround sound experience in your own house. Placing conventional speakers throughout the room results in an eyesore of wires, making this option impractical. For this reason, installing speakers inside the wall can be a great option. They provide excellent surround sound and may be placed either on the ceiling or in the surrounding walls.

Nowadays, the option of placing in-wall speakers is taken into account while designing furniture and decor for the home. The interior wall area can be used to conceal speakers, if desired. It is now normal practice to install in-wall speakers in a circle around a television set. There are a lot of things to consider when shopping for in-wall speakers; here are some of the most important.

Where the speakers are installed dictates what kind of speakers can be used in the walls. All of them are in-wall speakers, but you can also install some of them in the ceiling or even outside. The right outdoor speakers can handle the damp environment. The sound quality of the speaker is also a defining characteristic of the type. Both standard, uncomplicated sound waves and immersive surround sound can be generated by the in-wall speakers.

 

When installing in-wall speakers, it’s crucial to consider the speaker size. Because cutting holes in the wall to accommodate the speakers will leave less gaps and prevent the wall from seeming wonky, this is the case. The typical size for these in-wall speakers is 8 inches. However, there are in-ceiling speakers of varying sizes and outdoor speakers of varying shapes and forms.

A higher maximum output power means a louder and cleaner sound reproduction from the speaker. The maximum output power of in-wall speakers typically falls between 80W and 100W. If you want good sound quality and volume, look for speakers with at least 80W of power, but 100W is even better.

Polk Audio 255c-RT In-Wall Center Channel Speaker

This appears to be a model that was developed with the pleasure of watching movies at home in mind. The sound that it produces will unquestionably improve the quality of any movie or music system that is already in place. It has a sound that is at the very pinnacle of quality.

The 255c has a sturdy construction with high-quality component elements throughout its design. It measures 14.8 inches by 9.8 inches by 9.3 inches and weighs six and a half pounds; it is not a lightweight system; however, Polk is not known for producing lightweight products. The cavity that the speaker will be installed in must have a depth of at least 3.3 inches. You will need to drill a hole that is 13.1 by 7.6 inches in order for it to fit properly.

Polk created this component with the intention of serving as a system’s centre speaker. In a perfect world, it will be situated in the exact middle of your room. The cone of the 5.25-inch woofer is made of polypropylene. In addition, a silk/polymer dome tweeter measuring 1 inch in diameter and mounted on a swivel mount.

It has Polk’s PowerPort and Dynamic Balance sound systems, both of which were designed by Polk. The two-way speaker will work well with the majority of different surround sound systems. The dual-band architecture of the bass ports results in a response that is smooth at low frequencies. The 255c has a respectable frequency response that ranges from 30 Hz all the way up to 27,000 Hz. They have a maximum power rating of one hundred fifty watts.

There is a metal speaker grille with a thin mesh that is barely 7 millimetres away from the actual speaker. It is attached to the device via magnets and can be detached from it without much effort. If necessary, you can even paint it to match the aesthetic of your space. If you remove the grille from the speaker, you will be treated to a breathtaking glimpse of the speaker’s inner workings; is this your preferred configuration?

PROS

• Excellent subtlety in design and construction.
• A wide spectrum of powerful sounds with a good quality.

CONS

• Some additional components will be required.

Polk Audio RC85i 2-way Premium In-Wall 8″ Speakers 

Once again turning to Polk for your in-wall speaker needs, this time settling for the Polk Audio RC85i 2-way Premium In-Wall 8. 

Those individuals who are looking for high-quality audio in a small in-wall design will find the Polk Audio RC85i 2-way Premium In-Wall 8″ Speakers to be an excellent alternative. The music produced by the 8-inch cone made of polymer composite is clear and well-balanced, while the high frequencies produced by the 1-inch silk dome tweeter are clear and distinct. These loudspeakers are built to last, as their durability and lifespan are ensured by the use of high-quality materials throughout their construction.

They are an excellent option for do-it-yourself projects due to the straightforward and user-friendly installation method. The speakers come with a white grille that can be painted, making it simple to incorporate them into the decor of the interior of your home. These speakers have an amazing frequency response, which allows them to produce a sound that is well-balanced, with good bass and treble. As a result, you can use them for the audio of music as well as movies.

The adaptability of these Polk Audio RC85i speakers is one of the most notable aspects of these speakers. Due to the fact that they can be configured for either stereo or surround sound, they are an excellent option for usage in home theatres. In addition, as a result of their tiny size, they may be easily installed in a wide variety of locations, ranging from intimate rooms to expansive living areas.

PROS

• Simple installation with everything needed for assembly provided.
• Reproduction of a wide range of frequencies.

CONS

• A sizable assembly of audio players.

Klipsch R-5650-W II In-Wall Speaker

This in-wall speaker from the respected speaker manufacturer Klipsch lives up to the brand’s stellar reputation. The combination of the 6.5-inch woofer and the 1-inch titanium dome tweeter results in a robust bottom and a refined midrange.

At the very top, a Klipsch Tractrix horn directs sound from the tweeter. Klipsch’s trademark copper spun alloy serves as the woofer’s finish. Each part produces its own loud, distinctive noise.

Depending on your preferences, you can direct the sound anyway you choose…
It’s possible to tilt the tweeter at an angle of 15 degrees. You can target the sound where you want it to go, so you receive the finest possible experience in any room. The volume may be adjusted, and the sound’s treble and midbass levels can be altered independently. Additionally, disabling the IR receiver may help with this problem.

It’s just over seven pounds, and it looks and feels durable thanks to its solid build. Dimensionally, it’s quite sizable at 14.3 by 9.3 inches. You’ll need to make a hole measuring 13 by 8 by 3.3 inches. Brackets for mounting make set up a breeze. This is a remarkably potent. This loudspeaker can handle up to 200 watts of peak power and has a frequency response of 40 Hz to 23 kilohertz. A frequency of 100 hertz would be roughly similar to that (RMS). Particularly efficient for an in-wall installation. Miniature and paintable, their speaker grille can be matched to any decor.

It’s important to note that each speaker is offered separately, as is the installation kit. This is certainly one of the most appealing and high-quality in-wall speaker configurations for home theatres on the market today. The higher asking price could put off some customers, but the excellent construction and audio quality more than make up for it.

PROS

• High-powered audio with a wide frequency range.
• Awe-inspiring Klipsch graphic design

CONS

• Fitting kit is sold separately and it is quite pricey.

Bose Virtually Invisible 891 In-Wall Speaker

The Bose Virtually Invisible 891 In-Wall Speaker is a state-of-the-art in-wall audio system, featuring cutting-edge technology to deliver superior sound in a space-saving form factor.

The 891 has a low profile and may be painted to blend in with the wall, making it a great option for individuals who value a subtle appearance.

The Bose Virtually Invisible 891 has jaw-dropping acoustic performance. The speaker’s two drivers (a tweeter and a woofer) produce rich lows and clean highs, making it ideal for music and film soundtracks alike. The 891 is capable of faithfully reproducing the full gamut of musical genres, from classical to death metal, thanks to its broad frequency response.

Simple mounting hardware makes set up a breeze, and the system requires nothing in the way of care once it’s in place. The 891 is a flexible choice due to its compatibility with a wide range of audio systems. The speaker also includes an equaliser so you may adjust the volume and bass to your personal preference.

The Bose Virtually Invisible 891 In-Wall Speaker is a high-end in-wall speaker that delivers crystal-clear sound without being obtrusive. The speaker’s excellent sound quality, adaptability, and simple installation make it a fantastic option for anyone shopping for an in-wall speaker system. Although the 891’s expensive price tag may deter some shoppers, Bose’s in-wall speakers deliver exceptional sound quality for those who seek it.

PROS

• Outstanding structure and design.
• Superior sound quality thanks to an additional tweeter.

CONS

• The price may turn off some potential customers.

JBL SP6II In-Wall/In-Ceiling Home Theater Surround Sound Loudspeaker

Another reputable maker of stereo components. They have been creating state-of-the-art audio equipment since 1946. Any time the speaker wants to get to the point, they can do so without wasting time with small talk.

It’s visually appealing without being overbearing, so it might go with a wide variety of decor styles. You can choose to utilise the grille open or closed. If you leave it on, the grille will seem like an AC vent. Perhaps that was the original aim of the design. You can paint the grille to make it coordinate with the rest of your decor.

The 2-channel audio system gives equal weight to both high and low frequencies. Sometimes this causes the middle to be overlooked. That is not the situation here. The bass is present, but it doesn’t overwhelm the clear and unmuddled mids.

The sound is created by a 6.5-inch woofer with a titanium laminate cone. It is encased in rubber, which should help keep any distortion to a minimum. The rubber surrounds on the speaker ensure that it will last for a long time. The higher frequencies are handled by a tweeter that measures just one inch in diameter and is also constructed from titanium laminate. Already built into the structure is a swivel mechanism. In this method, you can direct the sound in whatever way you like.

The system works well with 80 watts of power from 38 Hz to 20,000 Hz. The crossovers in both speakers are built in, and they both operate at a frequency of 2800 Hz.

They’re a reasonable size, requiring only a 7.1 by 9.7-inch opening. Neither the cutout nor the speech size differ by that much. Getting the parts to fit together properly will require patience and care. Another possible problem is the depth of installation. Plasterboard and drywall appear to have no commonly agreed upon depth. A few, however, fail to maintain the recommended 4-inch gap. Due to the inexpensive cost, this is a fantastic option.

PROS

• Solid construction.
• Affordable, high-quality audio.

CONS

• There may be issues with the fit.

Monoprice 3-Way Fiber In-Wall Speakers

If you want high-quality in-wall speakers but have a limited budget, consider the Monoprice 3-Way Fiber In-Wall Speakers.

These speakers are surprisingly high-quality for the price, producing clean, well-balanced sound. The speakers’ PEI super tweeter, balanced dome tweeter, and polypropylene woofer work together to produce full-range sound with rich lows and clear highs.

The Monoprice 3-Way Fiber In-Wall Speakers are a wonderful alternative for a do-it-yourself in-wall audio solution due to their simple installation. The speakers feature a white grille that may be painted to fit your home’s decor. Given the speaker’s modest footprint, it’s an excellent option for any room size, from bedrooms to living rooms.

The adaptability of the Monoprice 3-Way Fiber In-Wall Speakers stands out among its many other great qualities. They’re perfect for home theatres because they can be used for both stereo and surround sound. As an added bonus, their affordable price makes them a desirable choice for those looking for an inexpensive in-wall audio system.

The Monoprice 3-Way Fiber In-Wall Speakers are fantastic all-around for the money. The high-quality sound produced by these speakers belies their modest price. They’re an excellent choice for in-wall audio systems because of their adaptability, low cost, and simple installation. These speakers will provide you an excellent listening experience whether you’re a movie or music aficionado.

PROS

• Funding mechanism.
• Extremely potent degree of performance.

CONS

• The overall standard of construction is not as great as with some competitors.

Klipsch R-5502-W II In-Wall Speaker

Once again, we turn to Klipsch for our in-wall speaker needs. The aesthetic quality of Klipsch’s products cannot be denied. To that rule, this speaker does not make an exception. It features a fantastic layout, high-quality construction, and can be installed in either the vertical or horizontal orientation.

The construction quality is Klipsch-standard sturdy. It has a weight of 6.5 ounces and a size of 3.75 by 8.2 by 17.8 inches. However, for its size, it is surprisingly lightweight. It was created to serve multiple purposes. Naturally, it’s not limited to only music players. You can use either the left or right speaker in your home theatre setup.

Its two 5.25-inch woofers are the most noticeable physical feature. If the structure is vertical, one will be at the top, and the other at the base. They have ceramic tweeter and woofer cones and the classic Klipsch spun copper style. The tweeter, a one-inch unit with a titanium diaphragm, is housed in the Tractrix horn at the speaker’s focal point. The horn can be rotated through 90 degrees to direct the sound exactly where you want it to go.

In most Klipsch models, the tweeter is housed in a horn. It can boost the volume of the sound being produced while simultaneously lowering the risk of distortion. The maximum power output of the speaker is 130 watts. That’s a continuous 75 watts RMS output. We wouldn’t put grilles on the front of our car. However, they have a magnetic attachment for easy use. They look good either unpainted or painted to match the rest of the room’s furnishings.

They can be installed easily but require an area roughly 4 inches deep. It pays to make sure there is room for them where you intend to put them. There’s a wide variety of frequencies present, from 46 Hz to 20 kHz, which results in superb audio quality. As a 3-way setup, it features crossovers at 1300Hz and 2200Hz.

PROS

• Magnetic grilles and a solid build quality make this a must-have.
• Devices with a revolving horn are in development.

CONS

• Noticeably pricey.

 

Yamaha NS-IW760 6.5″ 2-Way In-Wall Speaker

In reality, their maximum power output is about 130 watts, therefore they are not particularly loud. You should check if the audio is crisp, though.

Oh yes. As you crank the volume, the drivers won’t distort at all. The stereo effect created by the panning effect is excellent. A one-inch soft dome tweeter is sandwiched in between the woofers to handle the higher frequencies. The midrange is crystal crisp and well-defined thanks to strategically placed crossovers.

They’re stylish, but at 5.1 kilos and dimensions of 23.5 x 7.7 x 3.2 inches (HWD), they’re a bit cumbersome. Yamaha also includes a wall-cutting template, so assembly is a breeze. Since 3.5 inches of depth is all that’s required for a snug fit, there shouldn’t be any issues there. However, they are bulky and must be installed horizontally for optimum efficiency. Both the grille and the frame can be painted to match the inside design.

Despite the presence of two woofers, the bass is lacking. It’s actually quite subtle, and you might find yourself wanting more. As far as equilibrium goes, that worked out well for us. These speakers excel, however, in the midrange. These speakers are a fantastic buy due to their low price and high quality sound. You can use them for the left, right, or centre channel in your home theatre.

PROS

• Superior music with a wide audience appeal.
• Quality Yamaha sound for a reasonable price.

CONS

• It has a good sized fitting area.

Leviton AEI65 Architectural Edition Powered By JBL

Isidor Leviton, like the founders of many other thriving American firms, immigrated to the United States from Russia in 1906. In fact, audio and speaker cabinet design were never even a part of the company’s original mission, and now represent only a small fraction of its overall production.

The Leviton AE165 is a stereo pair of speakers optimised for use with home theatre systems. They weigh nine pounds each and have dimensions of 12.3 by 10.2 by 8.8 inches. As well as being capable of producing a hundred watts of electricity at their peak via a two-way arrangement.

With a JBL-made 6.5-inch woofer and a 1-inch dome tweeter, you can expect nothing but high-quality audio. Titanium lamination ensures accurate sound reproduction at high volumes in both. In addition, they have rubber surrounds to dampen noise and ensure peak performance throughout all frequency ranges. Furthermore, they are capable of producing sounds between 38Hz and 20KHz.

They’re well-made and feature a crossover with a Straight Signal Path (SSP) that keeps distortion to a minimum. The tweeter’s swivel mount and the speaker’s ability to disperse sound effectively are both noteworthy features. It has deep and rich bass. Both the baffles and the grilles can be painted to match your room’s design. The dog-ear mounting brackets make installation simple. A high-quality speaker set with a full, deep bass. They are reasonably priced, thus they must be among the greatest in-wall speakers you can buy.

PROS

• The JBL speakers sound really well.
• Simple adjustment.

CONS

• Not a tremendously appealing design with grilles removed.

82W Silver Ticket in-Wall Speaker

In the 1980s, Silver Ticket was founded to fill a need for reasonably priced, high-quality home theatre equipment. They have a fantastic selection of speakers that can be put on the wall or ceiling.

The 82W is a good illustration of this; if aesthetics and design were the deciding factors, it would undoubtedly win. At first glance, we thought it was an iPad with built-in speakers. Two-way system with an eight-inch polypropylene cone woofer; designed for in-wall installation. The huge 30-ounce magnet is cushioned by rubber to dampen noise and prevent distortion.

The tweeter may be rotated 15 degrees on its hinge for optimal placement of the sound. The silk dome is 20 millimetres in diameter. This speaker can provide a peak power performance of 120 watts and has a frequency range of 50Hz to 20kHz. The resulting 60 watts RMS is respectable. The speaker can be used in humid environments like a sauna or kitchen without damage. It could be used outside as well, provided it was protected from the elements.

Despite the fact that there have been problems with the clips used for installation. Its dimensions of 14.1 by 10 by 4.1 inches (HWD) are convenient. Because it is deeper than usual, you should measure its depth. Only 7 pounds are needed to carry it. It’s a fantastic option that won’t break the bank and works with 5.1, 6.1, or 7.1 channel home theatre setups.

The speaker has decent sound quality for the price.

PROS

• It has a stylish look and can be easily adjusted to fit.
• Affordably good sound quality.

CONS

• The clips used during setup are sometimes prone to being broken.

Pyle Ceiling Wall Mount Enclosed Speaker

Pyle is a well-known brand in the audio industry, and the quality of the firm’s audio products has earned them a strong reputation. Users have an interest in purchasing Pyle audio speakers, and the Pyle Ceiling Wall Mount Enclosed Speaker unquestionably lives up to users’ expectations in this regard.

You won’t experience any distortion when listening to loud music thanks to the powerful speaker’s maximum output power of 400W. Even relaxing background music may be heard in all of its intricate detail and clarity. The speaker is compatible with all conventional receivers and amplifiers. The speaker is characterised by its broad frequency range as well as its low impedance.

The flush mount style makes for an easy installation process in openings that have been pre-cut. You have the option of installing the speaker in either the ceiling or the wall. The vented structure of the full-range speaker pair and the better tweeters contribute to the deep bass that the speakers produce. It is able to produce a stereo sound effect with a comfortable surround sound. The attractiveness of the speaker grill is enhanced by its fashionable white finish. Alternate grills can be installed for a more personalised look.

Its best features include its moisture-resistant material structure. It has adaptable and interchangeable grills for unique installations.
The reproduction of sound that is both stereo and dynamically full as well as full-range stereo sound is achieved with titanium dome tweeters.

PROS

• A wide frequency response and deep bass are featured.
• Effortless installation thanks to the flush mount technique.
• Powerful sound with a high maximum output level.

CONS

• Not really strong in the low end sound department.

Acoustic Audio by Goldwood Home Theater 7.2 Speakers

Acoustic Audio by Goldwood is a company that makes premium audio equipment by combining cutting-edge engineering with premium materials. After installation, the Acoustic Audio by Goldwood Home Theater 7.2 Speakers can create a convincing impression of surround sound even in a sizable room.

The kit includes nine top-notch speakers: four for the walls, two for the ceilings, two for the floors (acting as subwoofers), and one for the centre channel (also put on the walls). Although this setup is standard for 7.2 speaker systems, yours stands out from the crowd thanks to its exceptional qualities. Woofers constructed from woven fibres improve the audio’s clarity. The butyl rubber surrounds not only give off a surround sound vibe, but also improve the sound quality.

High-quality titanium tweeters that can be rotated 90 degrees add an extra layer of depth to the sound that is reproduced. White aluminium grills are available and can be repainted in whatever colour you choose. When installing in pre-cut holes, the flush mount method simplifies the process. The slim design of the housings makes the whole system more space-efficient when mounted on a wall.

Its top-rated characteristics include titanium tweeters that can be rotated to increase both clarity and stereo separation. Audio quality from cones made of woven fibre is superb as well as the butyl rubber envelops the user completely.
And lastly its numerous speaker designs reliably deliver excellent audio quality.

PROS

• Mounting brackets and ventilation grilles that can be painted.
• Mechanism for locking doors that fits neatly into a wall stud.
• Including templates to cut out.

CONS

• The passive sub speakers must be powered by a separate amplifier.

Theater Solutions Home Theater 7.2 Speaker System

Home theatre products are a specialty at Theater Solutions, and the store’s wide assortment has earned them a stellar reputation.

In some cases, using such gadgets can make any room feel like a theatre, be it a living room or office. The company produces a wide range of equipment for theatres, the most popular of which are the audio products. The Theater Solutions Home Theater 7.2 Speaker System is a great alternative if you’re looking to set up a whole speaker system as opposed to just one or two speakers.

There is one central speaker and four side speakers (both rectangular and circular), two surround speakers (both circular and rectangular), and two subwoofer speakers (both passive). Pivoting tweeters capture every nuance, clarity, and depth of sound. Using crossovers in conjunction with tweeters is a tried and true method for minimising distortion throughout the setup process. The surround drivers in the passive subwoofer and the woven fibre cones in the wall centre speaker both contribute to the high quality of the sound.

You can instal them in the ceiling or the walls, and the surround sound effects they produce might make it feel like you’re in a theatre. All setup instructions may be found in the package. It is also possible to purchase paintable grills that can be altered to complement the existing wall paint. When utilised simultaneously, the system’s speakers can provide up to 2000W of total output power. In order to provide a high-quality listening experience, a reliable receiver should be added to the setup.

Its notable features include surround sound, achieved by using multiple speakers in various locations. Superior grade parts that will last longer and produce better sound.High-quality materials were used for the cone, crossover, and drivers. It may be set up in a variety of ways, making it perfect for use in any space.

PROS

• Suitable for use with a wide range of widely used receivers.
• High-quality tweeters that improve the sound in all respects.

CONS

• It’s a brand-new product that’s just hit shelves.

Focal in-Wall 2-Way D’Appolito Loudspeakers

The French manufacturer Focal has found success on the global stage thanks to its high-quality speaker products. The company has been making speakers for over 40 years, and its reputation for quality and reliability has grown steadily as a result of the wide variety of speakers it offers at affordable prices.

Focal’s in-wall 2-way D’Appolito loudspeakers deliver ferocious sound quality. It may be compact, but its maximum 120W output more than makes up for its diminutive size. Stereos, home theatres, and distributed systems all have flexible speaker placement options to best suit the listening environment. The loudspeakers have an adjustable tweeter and an inverted aluminium dome to maximise sound quality.

Moreover, the Polyglass cone exhibits less deformation. The loudspeakers can be placed in the centre, left, or right channels, depending on your preference. The unique frameless square form with a circular grill makes the product functional and beautiful. Ideally, the speaker would be used in spaces ranging from very small to medium-sized ones.

In this product every one of the three placement types has its unique function.
On the other hand it has adjustable tweeter with an aluminium dome for maximum volume. Polyglass material is used for the cone, which minimises acoustic distortion. Overall the product puts together a frameless structure is a breeze.

PROS

• The acoustics are top-notch, and the performance is commensurate.
• Structure that is both compact and sturdy.
• Amplification and clarity in the reproduced sound.

CONS

• This is a relatively new product on the market.

Conclusion

In-wall speakers are a great alternative to standard speakers for a contemporary house or office, which is why you should give them serious consideration. Openings and spaces should already be pre-cut into the wall as well as the ceiling in this area. You don’t need to go to the movies when you can watch movies in the comfort of your own home or office.

By strategically placing speakers around the room, you may easily get the immersive effect of surround sound. We have compiled a list of the very best in-wall speakers for you to select from according to your own taste. In addition to that, you will find the essential criteria for evaluating speakers in the purchasing guide that we have supplied you with. If you are still unsure about which in-wall speaker to purchase, the options listed below are some suggestions that we have for you.